Whatsapp
Gamma● online
click image to preview
activate zoom
Sensor Mounting Pad 1.375 Inch Dia. 1/4-28 Thread
Rp 123| Stok | Tersedia |
| Kategori | Accelerometer Mounting Tools |
Sensor Mounting Pad 1.375 Inch Dia. 1/4-28 Thread
Sensor mounting pad, adhesive or weld mount to machine, 1.375″” diameter, 1/4-28 threaded hole for sensor mount Product Type: Mounting Base Size – Diameter: 1.375 in (34.79 mm) Mounting Thread: 1/4-28 Female (No Metric Equivalent)
Untuk pemesanan silahkan hubungi kontak halaman ini!
Sensor Mounting Pad 1.375 Inch Dia. 1/4-28 Thread
| Berat | 300 gram |
| Kondisi | Baru |
| Dilihat | 49 kali |
| Diskusi | Belum ada komentar |
Articulating Arm Magnetic Base 135 Pound. Fixed arm height: 5.5”; Extension arm length: 7.0”; Reach: 10-1/2″; Holds 3/8″ stem, dovetail and lug back; Magnetic Base dimension: 2.30″ L x 1.98″ W x 2.18″ Untuk pemesanan silahkan hubungi kontak halaman ini!
Rp 123
1 1/4 Inch Spot face drill bit for creating a flat mounting surface: useful to epoxy or mounting of an accelerometer or washer. This is a short Series, 4 Flute, High Quality, and made in USA Sport Facer. Included in the kit is one replaceable pilot 3/16 inch stub length SPIRALBOHRER High Speed Steel drill bits, a… selengkapnya
Rp 123
MH111-1A Specification: Ultra Low Profile Flat Surface Magnet Mounting Base with 1/4-28 Threaded Blind Tapped Hole, 24 lbs. (10.9 kg) Pull Strength, 1 in. (25.0 mm) OD, 0.31 in. (7.7 mm) Height Product Features: The Industry’s Lowest-Profile Solution When Paired With CTC’s Miniature Side Triaxial Exit Sensors Access Readings That Were Previously Unreachable Due to… selengkapnya
Rp 123
MH112-1A Specification : Multipurpose 2 Rail Magnet Mounting Base with 1/4-28 Integral Stud, 30 lbs. (14 kg) Pull Strength, 1 in. (25.4 mm) OD, 0.68 in. (17.27 mm) Height Product Features : Durable 303 Stainless Steel case and mounting stud High strength Neodymium Iron Boron magnet optimizes pull strength and performance – 2 rail mounting… selengkapnya
Rp 123
AMT-111 stainless steel set screws: 10-32 thread, 1/2 Inch Length, quantity of 100 each. Used for mounting accelerometers and magnets. Untuk pemesanan silahkan hubungi kontak halaman ini!
Rp 123
1 Inch Spot Face Drill bit for creating a flat mounting surface/spot facing operations: useful for epoxy or mounting of an accelerometer or washer. This is a 3.2 inches long, 4 Flute, High Quality, and made in USA Spot Facer. Included in the kit is one replaceable pilot 3/16 inch stub length SPIRALBOHRER High Speed Steel drill… selengkapnya
Rp 123
MH122-1A Specification: Flat Surface Magnet Mounting Base with 1/4-28 Threaded Blind Tapped Hole, 40 lbs. (18 kg) Pull Strength, 1.00 in. (25.4 mm) OD, 0.68 in. (17.27 mm) Height Product Features: – Durable 17-4 Stainless Steel case – High Strength Neodymium Iron Boron magnet optimizes pull strength and performance – Maximum frequency response up… selengkapnya
Rp 123
MH110-1A Specification: Ultra Low Profile Flat Surface Magnet Mounting Base with 1/4-28 Threaded Blind Tapped Hole, 21 lbs. (9.5 kg) Pull Strength, 0.75 in. (18.8 mm) OD, 0.31 in. (7.7 mm) Height Product Features: – Durable 17-4 stainless steel case – High-strength neodymium iron boron magnet optimizes pull strength and performance – Maximum frequency response… selengkapnya
Rp 123
MH114-3B Specification : Electrically Isolated, Multipurpose 2 Rail Magnet Mounting Base with 1/4-28 Blind Tapped Hole, 50 lbs. (23 kg) Pull Strength, 1.4 in. (35.56 mm) OD, 0.75 in. (19.05 mm) Height Product Features : Electrically Isolated -Durable 303 Stainless Steel case and mounting hole – High strength Neodymium Iron Boron magnet optimizes pull… selengkapnya
Rp 123
Sensor mounting pad, adhesive or weld mount to machine, 25 mm diameter, M6x1 threaded hole for sensor mount. Product Type: Mounting Base Size – Diameter: 25.0 mm Mounting Thread: M6X1 Threaded Hole for sensor Mount. Untuk pemesanan silahkan hubungi kontak halaman ini!
Rp 123
Belum ada komentar, buka diskusi dengan komentar Anda.